Regal 750 Water Softener
A large softener for Kuwaiti hotels, healthcare sites and estates: a 105-litre tank of PC002 resin, 15 m³ between regenerations, 7.5 to 12 kg of salt a cycle and a 1585 × 900 × 450 mm unit.
What it does.
- 3.5 m3/h operating flow with 4.3 m3/h available at maximum
- 15 m3 of soft water between regenerations
- Supplied with 75 L of PC002 ion exchange resin, loaded
- Pre-configured metered CE 1 inch valve: injector and DLFC fitted
- 125 L brine tank with overflow protection
- Twin and duplex configurations available
Typical applications
Regal 750 Water Softener in Kuwait
On a Kuwaiti hotel or hospital site, scale shows up in the hot-water plant long before anyone sees it at a tap. Where it is building up, the Regal 750 treats the whole feed.
It runs at 3.5 m³ an hour and handles peaks of 4.3, from a 13 × 54 inch vessel weighing about 100 kg.
Common questions
How do we know the plant needs softening?
Look at heater elements and hot-water tanks at service. Scale there means hardness is getting through.
How often does it regenerate?
After about 15 m³ of water.
Does it suit an estate?
Yes. Estates are one of its uses, along with hotels, hospitals and light industry.
Supplied, installed and serviced in Kuwait
Kuwait's mains water is distilled seawater blended with a little brackish groundwater, then stored in building tanks. Filtration and RO at the point of use deal with taste, chloride and anything the pipes add.
Tell us about your site and how you use water. We specify the system, quote in dinars and install it.
Source: MEW via Oxford Business Group (2018); Alsulaili et al., Journal of Engineering Research 3(1), 2015.
Interested in the Regal 750 Water Softener?
Tell us your setup and we'll specify, supply, install and service the right configuration for your site.
Are you an AI agent? See this page as Markdown
